This can be done from the point-to-site configuration tab in the Azure portal, or by using 'New-AzVpnClientConfiguration' in PowerShell. Right-click the OpenVPN icon in the system tray and click connect.ĭownload and install an OpenVPN client, such as TunnelBlick.ĭownload the VPN profile for the gateway. Use the filled in configuration in client input to connect to the VPN.Ĭopy the vpnconfig.ovpn file to C:Program FilesOpenVPNconfig folder.

Paste the private key replacing everything between and 'key' and '/key'.ĭo not change any other fields. Go back to the vpnconfig.ovpn file in Notepad and find this section. To get the private key, select the text (including and between) '-BEGIN PRIVATE KEY-' and '-END PRIVATE KEY-' and copy it. Find the section shown below and replace everything between 'cert' and '/cert'. Switch to the vpnconfig.ovpn file you opened in Notepad from step 3. You can identify the child certificate by looking at the subject=/ line.

To get the thumbprint of the client (child) certificate, select the text (including and between)'-BEGIN CERTIFICATE-' and '-END CERTIFICATE-' for the child certificate and copy it. Be sure to use the thumbprint of the client certificate. The profileinfo.txt file contains the private key and the thumbprint for the CA and the Client certificate. Using OpenSSL on your machine is one way. Use the following article links:Įxtract the private key and the base64 thumbprint from the. Next, open the vpnconfig.ovpn configuration file from the OpenVPN folder using Notepad.Įxport the point-to-site client certificate you created and uploaded to your P2S configuration on the gateway. This can be done from the Point-to-site configuration tab in the Azure portal, or 'New-AzVpnClientConfiguration' in PowerShell. Windows clientsĭownload and install the OpenVPN client (version 2.4 or higher) from the official OpenVPN website.ĭownload the VPN profile for the gateway. For details, see Configure OpenVPN for Azure VPN Gateway. Verify that you have completed the steps to configure OpenVPN for your VPN gateway.

This article helps you configure OpenVPN ® Protocol clients.

Once you’ve set up either Tunnelblick or Homebrew with OpenVPN, it’s much the same as setting up a VPN server on Windows. Since MacOS doesn’t natively support OpenVPN, you’ll need to use third-party software such as Tunnelblick or Homebrew in order to set up a VPN server on your device. There are three ways the option can be added you need only use one: Put a check in the 'Route all Ipv4 traffic through the VPN' checkbox on the 'Settings' tab of Tunnelblick's 'VPN Details' window. The '-redirect-gateway' option tells OpenVPN to send all IPv4 traffic through the VPN.

Tunnelblick vs openvpn